|
Page 5
Sep 12 2013
As for products. I think I am taking a break. I have tested out many products that I have not discussed. For instance: G-Pen, 710, Essential, and many more. I am not really in to ripping on companies. Most of those items I have found to be over priced junk. I may show some pictures to display that I did test those items, but for now I would rather concentrate on what works. What works the best for me period is the eGo C Twist variable Voltage battery, iClear16 tank, and also the SVD (Superior Vaping Device) by innokin with an iClear30 all by innokin, as far as I am concerned, their products are the whoop for cannabis oil or even e-cigarette oil.
I have many tips and advice. For now I will discuss one. Whether it is a C4, iClear16, or something similar, one example: Say you put fresh oil in a brand new unit and the heating coil is broken. Now you don't want to waste your fresh oil right? Or used oil for that matter. I have found the best way to get the oil back out of the unit/clearomizer for whatever the reason may be. Fill a large glass with very hot water, put your unit inside a zip lock type sandwich baggie (hopefully leak proof) I put the unit in the corner of the baggie. Soak it in the hot water for 5 or 10 minutes. The heat should cause the oil to become thin enough to be able to empty up to 90% of it out. When I have to pour mine out, I empty it into a small metal measuring cup tilted so I can suck the oil up into 1CC size syringe(s). Back in the syringe you can easily inject the oil back into a functioning clearomizer/unit.
Here is an example.
Keep checking back in. I do have more to discuss and I do have more testing to do as well.
Sep 14 2013
Here is a picture of what I discussed previously regarding the heating elements of the iClear16 and iClear30 being interchangeable. As you can see, there is a bit of a difference in the wick system. Other than that, I don't see any other differences. I am no sure which element I prefer yet. I ohm tested each of them on my SVD vaporizer. They both read 2 - 2.1 ohms. You may want to try each of them in either device, the i16 or i30. Up above in previous posts there are links to where they can be purchased.
I had also mentioned previously this device with a link to where you can purchase it. It is a 510 to 510 thread adapter, sealed. It being sealed prevents oil leaking down to the battery. I have found another purpose for these adapters. They are a must have. You can see in the picture, both of my battery chargers for the eGo C Twist or DreamVapor have these installed. The adapter protects the battery chargers from oil or anything else sticking to the battery/charger after being charged. When this happens and you unscrew your battery from the charger, they become stuck together, the oil becomes like glue. When you go to unscrew the battery from the charger, it will either damage the battery or the charger. With the adapter, at the least it will save one of the devices, well both really, should oil get onto the battery or charger. Say it sticks and you unscrew the battery from the charger and now the adapter is stuck to the battery. All you have to do is heat the adapter up a little bit with a lighter or something, then after it warms, the adapter should unscrew from the battery just fine. Next thing to do is clean each part with some alcohol. The adapter also offers another bonus. Here and there I will get a battery or charger that just does not work together. Usually it is because there is not a good connection. In the first picture you can see two 510-510 adapters. One of the adapters I unscrewed a washer. After unscrewing the washer, my battery that would not work with the charger now works great! By removing the washer, it allowed the battery to thread in deeper to the charger and make good contact. These adapters are only $3.99 last I checked. I have found them to be worth having. To save you the trouble of searching for it, here is the link to the adapter http://highdesertvap...r-(Sealed).html
Edit: Just realized this. You do need to remove the washer from the adapter for it to work correctly on a charger. For now on my chargers will always have an adapter on them I will not break another charger because of the sticking issue. Also, I just got lucky! The last charger I ruined, I took it apart and was able to re-solder the wire that became disconnected. Pain in the ass, but it worked!
 
I have more to discuss on using and cleaning the equipment. I like to use 151 Everclear. I would prefer 190, but it is not available to purchase in Michigan. If you have to, you can use 100 proof vodka. When it comes to my vaporizers, that is all I use for cleaning.
Keep checking back for more updates and information.
Sep 22 2013
Oct 08 2013
Besides for tips on cleaning and using the items, I am really hoping I get to try some important tests. Like trying out non decarbed RSO, which is not RSO. It would be quizo hash. For all I know it is not going to work well, or it may work much better. Decarbing could have strong effects either way. I am really looking forward to conducting the test. I am almost ready.
Also, winterizing, many of the methods I really don't care for or simply don't have interest in. I am curious and would really like to do a quality comparison of winterized oil and not winterized oil. I don't recommend winterizing oil for medicinal use. It could be removing many of the necessary CBDs or other elements that we may want. It could have a good effect on the taste, especially with lower quality oil or just oil that is made with higher chlorophyll plants. I have plants I don't use for oil, they produce great oil, it just comes out dark. It still tastes pretty good.
I am hoping to share the results soon.
Continued on Page 6 . . .
|
